Getting decent NBN in an older home: who to call for what
When the internet is slow, most people ring their internet provider and get told to restart the modem. Sometimes that’s the right answer. Often the problem is somewhere the retailer can’t see: the wiring inside your walls, where the modem sits, or the type of NBN connection your street has.
Step 1: know your connection type
Your bill or your retailer’s app will tell you which technology serves your address. You can also check on the NBN Co website.
- Fibre to the Premises (FTTP): fibre runs into a box on your wall. Usually the most reliable.
- Fibre to the Node (FTTN): fibre runs to a cabinet in the street, then the old copper phone line runs to your house. Speed drops with distance and old internal phone wiring.
- Fibre to the Curb (FTTC): fibre runs to a pit outside your property, with a short copper run to the house.
- HFC: uses the old pay-TV coaxial cable.
- Fixed wireless and satellite: common in regional areas.
NBN Co has been upgrading many FTTN and FTTC premises to full fibre. If you’re on copper, it’s worth checking whether your address is eligible.
Step 2: work out where the slowdown is
- Plug a laptop directly into the modem with an Ethernet cable and run a speed test. If it’s fast here but slow on Wi-Fi, the problem is in your house, not the NBN.
- If it’s slow even when plugged in, try plugging the modem into a different phone socket (FTTN/FTTC) or check the lights on the NBN box (FTTP/HFC).
- Test at different times. Slow only in the evening usually means congestion with your retailer.
Who fixes what
| Problem | Who to call |
|---|---|
| Dropouts, plan speed, evening congestion, modem faults | Your internet retailer (they log faults with NBN Co for you) |
| Fault in the street, pit, node or NBN connection box | Your retailer, who raises it with NBN Co |
| Old phone sockets, extra jacks, internal copper wiring | A registered cabler |
| Ethernet cabling to rooms, data points, moving the modem | A registered cabler |
| Weak Wi-Fi in parts of the house | Better router placement, a mesh system, or wired access points (cabler) |
| New power points for equipment | A licensed electrician |
The old-wiring problem
On FTTN and FTTC, every extra phone socket in an older house can degrade the signal. A cabler can disconnect the unused sockets and run a clean line straight to the modem’s location. It’s often one of the cheapest fixes for slow copper NBN, typically $150 – $350.
Running Ethernet through the house
If people work from home or game, wired connections to a study and the TV beat any Wi-Fi system. Typical prices:
- One data point in an easy single-storey roof: $150 – $280
- Several data points to a small network cabinet: $600 – $1,500
- Double-storey or brick homes: more, depending on access
In Australia, anyone installing or altering telecommunications cabling must be a registered cabler. That includes Ethernet cabling in your walls. Ask for their registration and keep the cabling advice form they should give you when the job is done.
Getting better Wi-Fi without new cables
- Move the router out of cupboards and away from the TV cabinet, ideally to a central, raised position.
- Use the 5 GHz band for devices near the router and leave 2.4 GHz for longer range.
- Replace an old retailer-supplied modem if it’s more than five or six years old.
- For larger or double-storey homes, a mesh system with two or three nodes usually beats a single powerful router.
Questions to ask
- Retailer: Is there a known fault in my area? What sync speed is my line getting?
- Retailer: Is my address eligible for a fibre upgrade?
- Cabler: Are you registered, and with which registrar?
- Cabler: Will you remove unused phone sockets as part of the job?
- Cabler: What category of cable are you using (Cat6 is a sensible minimum)?